Buy Cheap Dremel 6300-05 120-Volt Multi-Max Oscillating Kit From Here Now!
The Dremel Multi-Max Oscillating Tool offers do-it-yourselfers and pros a versatile and effective multitasking tool. With fast side-to-side motion, the Multi-Max can take on a variety of projects that involve repair, remodeling, or restoration. Repair. Remodel. Restore. Optimal Control. Safe Operation. High Precision. Minimal Dust. For cutting, grinding, sanding, scraping and grout removal. Includes: Dremel Multi-Max tool, 3/4" Wood Flush Cut Blade - MM440, 3" Wood and Drywall Saw Blade - MM450, Hook and Loop Pad - MM11. 60, 120, and 240 Grit Paper for Wood - MM70W, Storage Case, Getting Started Booklet.
Readmore
Technical Details
- Powerful 1.5 amp motor cuts through 1 ¼-Inch oak door jamb- Compact design provides access to tight spaces
- 10,000 to 21,000 OPM wide speed range for optimal control
- Quick Fit feature for faster accessory change
- Electronic feedback circuitry for consistent speed under load
See more technical details
By G. Ishii (Hawaii)
During my installation of a new screen door, I found that it wouldn't be able to close without cutting out some of the wood frame all around the door. After chiseling the jamb a little at at time, I found that I would have to cut about 1/2" off the jamb. I did one side in a couple hours and called it a night. That night I thought about the Fein MultiMaster 250 Start Power Sanding and Scraping/Cutting Tool info-mercial and how that tool could be a big help in cutting the jamb in-place since I didn't want to remove it and didn't have a table saw to cut it anyway. So, the next day I went to Home Depot and purchased the Dremel 6300-05 120-Volt Multi-Max Oscillating Kit for $109. I would have bought it from Amazon, but I wanted to finish installing the door right away.
USE: The Dremel is quite easy to use. The attachments are not quite "quick-change" since you have to use an (included) allen wrench to loosen a screw and place the "bit" under the washer and onto 12 pegs (which helps secure the "bit" into place) then tighten the screw to secure it. Cutting was fairly easy; I used the rectangular shaped wood and metal cutting tool, but it was a little difficult getting the "feel" of where it was cutting once it was into the wood a good amount. (Now that I think about it, perhaps I should have used the circular wood cutting tool or at least tried it, duh.) The tool is multi-speed (1-10) and cut through the wood pretty easily (on 8 speed). The sanding "bit" was a little more of a challenge to get on as it required the complete removal of the screw and washer assembly in order to get the sanding pad on. I don't know if my pad is a little defective, but it was a little difficult to get it on the pegs. Once on , however, the tool did an excellent job of sanding the frame down to a nice smooth finish. (Although one corner of the "hook & loop" pad got totally wrecked - its a good thing there's three corners to use.)
OVERVIEW: Overall, I was satisfied with the tool. It cut quite well and sanded great. Putting on the attachments was fairly easy, except for the sanding pad. The product description on this site says that it creates low dust, but it made a good amount of dust. Though that is expected when cutting wood with a high speed tool. And it also said that it was quiet, but the next time I use this tool, I am using earplugs because at that high rpm (close to 20,000) it pretty much screams when cutting and my ears felt like I was at a rock concert afterward. I would also recommend a dust mask and closed eye protection for the dust. For the price (cheaper than the competition), the Dremel did a good job and is, to me, a reputable, trusted brand.
By Tom (Florida)
Used it immediately upon receipt. Absolutely great tool for both homeowner and pro. DO not spend tons of cash on the "real name brand" as this Dremel version has all of the power and the tips and tools all fit both the Fein and the Dremel. I did a job that would have taken an hour trying to remove wood embedded in a window install in under a few minutes. Forget the time, the neat and clean cut and removal was great. Recommend this tool highly.
By Jacob (San Jose, CA)
I was looking for a tool that would reduce the time it would take to remove grout from my bathroom shower. The walls and ceilings have the 4x4in tiles and the floor has the 1in tiles. The grount blade works very well. One thing to note about the blade is that you can turn it in various configurations so you can also get the corners. Excellent design. I have had no problems with the the blade falling off as per other comments. The blades are about $7 cheaper from amazon than Home Depot. The vibrating action does not kick up a lot of dust as other circulating tools and it rarely skips so you do not damage the tiles. Overall, i would definitely recommend this tool to anyone.
Images Product
Buy Dremel 6300-05 120-Volt Multi-Max Oscillating Kit Now
Buy Dremel 6300-05 120-Volt Multi-Max Oscillating Kit |
Cheap Dremel 6300-05 120-Volt Multi-Max Oscillating Kit | Low Price Dremel 6300-05 120-Volt Multi-Max Oscillating Kit | Best Dremel 6300-05 120-Volt Multi-Max Oscillating Kit | Order Dremel 6300-05 120-Volt Multi-Max Oscillating Kit | Good Dremel 6300-05 120-Volt Multi-Max Oscillating Kit | Lowest Dremel 6300-05 120-Volt Multi-Max Oscillating Kit | Save Dremel 6300-05 120-Volt Multi-Max Oscillating Kit | Discount Dremel 6300-05 120-Volt Multi-Max Oscillating Kit | Purchase Dremel 6300-05 120-Volt Multi-Max Oscillating Kit | Shop Dremel 6300-05 120-Volt Multi-Max Oscillating Kit | Buying Dremel 6300-05 120-Volt Multi-Max Oscillating Kit | Where Dremel 6300-05 120-Volt Multi-Max Oscillating Kit
0 comments:
Post a Comment