Buy Cheap Dremel 6300-03 120-Volt Multi-Max Oscillating Kit From Here Now!
Includes Multi-Max Oscillating Tool, (2) MM422 3/4" Wood/Metal Flush Cut Blade, (1) MM440 3/4" Wood Flush Cut Blade, (1) MM450 Wood and Drywall Blade, (1) MM500 1/8" Grout Removal Blade, (1) MM600 Rigid Scraper Blade, Getting Started Booklet, Carrying Case
Readmore
Technical Details
- Professional Kit- Focused on cutting and grout removal applications- Wide Variety of Accessories - Assortment allows user to complete a wide variety of cutting applications plus grout removal and scraping
- 10 foot cord - Longer cord reduces the need for an extension cord.
- Applications - Flush or plunge cutting, drywall and softwood cutting, non-ferrous metal cutting, rigid scraping, grout removal
- Kit contents ( 7 piece): (1) Multi-Max Tool, (1) MM450, (2) MM422, (1) MM500, (1) MM440, (1) MM600
See more technical details
By dalton will (massachusetts)
it was working ok, till today as a matter of fact! i like that i can cut a nice accurate thin kerf. it seems a little like a toy more than a tool, but it does work and it is lightweight. it stopped working in the middle of a cut. i don't know whether the switch is at fault or a loose connection inside..
By Dale I. Rubel
I purchased this tool for my husband for Christmas. Right after that we started a remodeling project in our house. I can't count the number of times he used the Dremel with great results. He has all the different attachments and I believe he used all of them. He thinks it's a wonderful addition for his tool box.
By M. Koch (Las Vegas)
I purchased this item a few weeks ago with the purpose of using it for two things, plunge cutting drywall for removal of sections all ready in place instead of using a blade (using the half moon blade for Drywall and wood). Also removing some grout (1/8 blade, purchased from another source), and in both cases it has worked without issue.
When plunge cutting drywall it actually works quickly and like stated with low dust kick-up, when going down a line it does take about 5 minutes to do a 8ft wall, but doing a outlet box takes just a minute. If have ever used a Roto-Zip it is a dust pig, this is not, but also a Roto-Zip I must say is more powerful and wild at times because it wants to rip through everything.
I do agree with others that the venting on the machine is in a poor location, you do want to hold it at the top for control, instead of the actual hand grip area, but depnding on angle and different attachments this may be a issue no matter where the venting is because of wanting to place your hand for best control at that time.
Overall it does what I wanted it for... low low dust compared to other power tools.
By Nancy C. Johnson (Cambridge, Ohio United States)
This tool is great. but I think that it should have included the basic part, the sanding attachment. That is the primary use of this tool, but this part was missing. The base price was $89, but I paid $125 to get the extra attachments for sawing and grout removal. I had to go to Lowe's to buy the sanding attachment for an additional $11 and then $25 for some sand paper as expected.
By Renso
Got the tool for Christmas. Needed it for undercutting baseboard as well as cut aluminum from my front door frame to fit in my new front-door threshold. As some of the other folks in these reviews, the tool wood-cutting bit kept on coming loose. I was afraid of tightening it too much, but after it came loose again-and-again after about 5 minutes of use I decided to tighten it until could feel the motor turning. This time it did not come loose as easily but I am not sure how long it will handle this - so far so good. It does however still come loose when I hit a hard spot, like when I encounter a nail or when it touched the cement floor when cutting the baseboard or if you force it - let the tool do the work.
If you want a tool that you can force and use for hours on end, you need to consider another, and needless to say a considerably more expensive tool. It is good value for money, and if you - like me - undercut lots of baseboard manually with a jam saw before you got this tool, you will find this tool a great time-saver and an absolute pleasure to use.
Just as side note I have only used the wood and wood-metal bits and have not used it to cut pipes, grout, etc, just used it to cut a small notch out of an aluminum door frame and the baseboards. I did use it to trim the edge of a custom-cut laminate flooring piece as I was too lazy to use the circular saw and it burns the wood but it did manage to trim 1mm off of it none the less.
Pros: Lightweight, relatively inexpensive, easy to use, great time-saver over manually cutting door-jams.
Cons: Thick (solid-wood) stair jams (not sure what this is called, the wood trim on either side of my stairs that run all the way down the stairs and meet the concrete floor where I installed the laminate flooring and had to undercut the wood trim to slide the laminate underneath, about 2in thick solid wood) took a while to cut and burns the wood with smoke pouring out of the wood (probably other oscillating tools will do the same), the heat that comes from the tool after about 5 minutes of continuous cutting is excessive, the bit that comes loose again-and-again is my biggest concern as now that I tighten it real good (until I can feel the motor turning) am not sure how long it will last before something strips or breaks but since it still holds have to give it the benefit of the doubt, the casing it comes in is very cheap, the custom bits are expensive (like the sander).
Images Product
Buy Dremel 6300-03 120-Volt Multi-Max Oscillating Kit Now
Buy Dremel 6300-03 120-Volt Multi-Max Oscillating Kit |
Cheap Dremel 6300-03 120-Volt Multi-Max Oscillating Kit | Low Price Dremel 6300-03 120-Volt Multi-Max Oscillating Kit | Best Dremel 6300-03 120-Volt Multi-Max Oscillating Kit | Order Dremel 6300-03 120-Volt Multi-Max Oscillating Kit | Good Dremel 6300-03 120-Volt Multi-Max Oscillating Kit | Lowest Dremel 6300-03 120-Volt Multi-Max Oscillating Kit | Save Dremel 6300-03 120-Volt Multi-Max Oscillating Kit | Discount Dremel 6300-03 120-Volt Multi-Max Oscillating Kit | Purchase Dremel 6300-03 120-Volt Multi-Max Oscillating Kit | Shop Dremel 6300-03 120-Volt Multi-Max Oscillating Kit | Buying Dremel 6300-03 120-Volt Multi-Max Oscillating Kit | Where Dremel 6300-03 120-Volt Multi-Max Oscillating Kit
0 comments:
Post a Comment